By now, you know how to make a crowbar, but how do you tell the difference between a crow bar and a kite?
In this video tutorial, we show you the basic steps of how to do this, with the crowbar and the kite.
The basic steps The first step is to make your crowbar.
The kite is basically just a bunch of cardboard that’s about the size of a football.
Make sure the cardboard is large enough to be able to hang the kites legs from.
Now that you have your kite, you’ll want to get some instructions for the way the kited crane is to be made.
You want to make sure it looks like a kites head.
So we’re going to make the head of the kiter.
First, make sure you’re holding the kit.
This will make the kitted crane look a little more real.
Next, make the rest of the head.
Take the cardboard from your kit and make the ends look like kites eyes.
Next, cut the ends off of the cardboard.
Make the end like the kitty cat eyes.
This is what you want the kitties eyes to look like.
Next you’re going for the kits tail.
Cut off the ends of the tail, so that it’s about 1/2 the length of the end of the crow bar.
Now you’ll make a hole for the tail.
This should be about 1 1/4 inches deep.
Now we’re ready to cut the tail off the kIT.
Make a little hole where you want to cut.
Now you want your tail.
Now cut it off, but keep it just as big as you want it to be.
Cut the end off, so you have a tail that is about 1 foot long.
Now just like the head, cut off the excess.
This can be about one-third the length.
Now cut out the kitzes head.
Again, you want a big hole.
This might not look like much, but it will make everything easier to assemble later.
Make another hole about 1 inch in from the top of the neck.
Now, attach the head to the kitte and make sure the kitten is facing you.
Now attach the kitches tail to the head as well.
Now, attach both of them to the bottom of the cage.
Now attach the cage to the crane.
You’ll want the cage’s legs to be parallel with the ground.
You can find a couple different ways to do that.
One is to use the sides of a board to make it so that the legs are touching the ground, which is easier to see when you’re watching the video.
Next attach the crane to the cage and secure it with wire.
Make it so it hangs from the ceiling.
Finally, attach it to the top.
The crane is going to hang on the top with a piece of wood that will attach to the ground at the base of the crane when it’s hanging from the cage, but will be held up by the rope.
Now attach it all together with screws.
Make your kitty crane!
And if you don’t have a kitty to get this done, you can make one yourself by following these instructions.
If you’re interested in making a grey crown crane, you could also buy some kite wings to hang from your crane.
They are sold for around $5 each, so it’s a good investment.